Process data capture: how machine, order, and shop floor data become the basis for forecasts and AI models, from capture through quality to use.
Your machines have produced data for years,
often more than anyone analyzes
Most companies capture more process data than they ever analyze. The limiting factor is usually the use of the data and rarely the capture.
What process data are and what shop floor data collection is
Process data are the technical readings from running operations, such as temperatures, pressures, cycle times, energy consumption, and quality measurements. Shop floor data collection, also called production data acquisition (PDA), adds the organizational view with orders, unit counts, run times, downtime reasons, and staff hours. Only together do the two give the complete picture of a process.
The distinction is secondary for analysis and AI. What matters is that both kinds of data describe the same operation and can be linked through order numbers, timestamps, and machine IDs.
Where process data come from
The data you already capture are often enough to get started with AI. New sensors are rarely the first step. Making the existing data usable almost always is.
Machine controllers
PLCs, sensors, and equipment deliver readings every second, often recorded for years and never systematically analyzed.
Predictive maintenance: planning maintenance from machine data
Shop floor data collection and MES
Order progress, unit counts, and downtime reasons form the organizational layer of shop floor data collection, which is usually already structured.
ERP and planning
Orders, dates, and materials provide the context that turns raw readings into operations you can interpret.
Manual entries
Shift logs, inspection records, and fault reports are underrated sources, especially for the question of WHY something happened.
The real limiting factor: data quality
Gaps in time series, changing units, duplicate order numbers, and downtimes without a reason code are defects that decide whether process data become a reliable model or an analysis that looks good and is wrong. That is why an honest quality check comes before any use of the data.
From process dataset to model
Cleanly captured process data are the basis of the use cases that pay off in manufacturing: predicting failures, detecting scrap early, and explaining bottlenecks and energy peaks. Our fully calculated examples show what this looks like in practice, and the corresponding workflow phase shows how data are acquired methodically.
Frequently asked questions about process data capture
What are process data, in short?
Process data are all the readings and status data that a running process generates, such as temperatures, pressures, cycle times, consumption figures, and quality values. They describe HOW an operation ran, whereas master data describe WHAT something is.
How do process data capture and shop floor data collection differ?
Process data capture collects technical readings from machines and sensors, while shop floor data collection, also called production data acquisition (PDA), collects organizational data such as orders, times, and unit counts. In practice the two terms overlap. Analysis and AI depend on being able to link the two levels.
What are examples of process data?
Typical examples in manufacturing are the spindle speed and temperature of a machine, cycle time per part, scrap quantity per shift, energy consumption per order, and the reason and duration of each downtime. In logistics, examples include dwell times, routes, and consumption per vehicle.
Do we need new sensors before AI pays off?
Rarely. Controllers, shop floor data collection, and ERP usually generate enough data for a first fully calculated use case. You can check whether the existing data are sufficient before investing in hardware.
How do process data become usable for AI?
It takes three steps. First, link the sources through timestamps, order IDs, and machine IDs. Second, check quality for gaps, units, and plausibility. Third, build models on the checked data, for example to forecast failures, scrap, or consumption.
Let us talk about your data
Free 30-minute initial call. Briefly describe your dataset and your plan; optionally you can state a preferred date.
These services do not replace legal data protection advice.